Steel fittings made in the USA. Our Do It Yourself kits give you everything you need for a steel kennel roof except the tubing. You buy standard top-rail pipe locally at Lowe’s or Home Depot, which saves on both materials and shipping.
What’s included
Each DIY kit includes the welded peak end and peak center fittings, clamps, connectors, a heavy-duty waterproof silver tarp and ball bungees. It’s the same hardware and tarp that go into our full kennel cover kits. The only thing left out is the pipe.
Fits your kennel, up to 12′ wide
The parts are the same for every kennel. The only difference is the brackets that attach the frame to your kennel, so choose your kennel type when you order:
Chain link: 1-3/8 inch or 1 inch round tube
Welded wire: 1-5/8 to 1-3/4 inch round, 1 inch round or 1 inch square tube
How many trusses?
Just like the roof on a house, the trusses hold it up: the more trusses, the stronger the roof frame. Choose more trusses if you get heavy snow or strong wind. Not sure? Email your kennel size and location to sales@shadenthings.com.
Installation
Cut the pipe to length, clamp the trusses to your kennel’s top rail, add the ridge tubes, then stretch the tarp over the frame and fasten it with ball bungees. Most people finish in under an hour with pliers or a crescent wrench.
Leave the peak ends open
Roof tarps cover the top of the frame but not the triangle-shaped peak ends. If the peak ends are closed in, wind gets trapped under the roof and acts like a parachute, and a strong gust can lift the cover or blow the kennel over.